Item No. Description
No. Description Supplement
(39)
Panel lock information F00: Off/F01: Partial lock 1/F02:Partial lock 2
F03: Partial lock 3/F04: Full lock
(40)
USB information U00: Not installed/U01: Full speed/U02: Hi speed
(41) Paper handling information 0: Paper source unit select/1: Paper source unit
(42) Color printing double count
mode
0: All single counts
1: A3, Single count, Less than 420 mm (length)
2: Legal, Single count, 356 mm or less (length)
3: Folio, Single count, Less than 330 mm (length)
(43) Black and white printing double
count mode
0: All single counts
1: A3, Single count, Less than 420 mm (length)
2: Legal, Single count, 356 mm or less (length)
3: Folio, Single count, Less than 330 mm (length)
(44) Billing counting timing -
(45) Temperature (machine inside) -
(46) Temperature (machine outside) -
(47) Relative humidity
(machine outside)
-
(48) Humidity (machine inside) -
(49) Fixed assets number -
(50) Job end judgment time-out time -
(51) Job end detection mode -
(52) Prescribe environment reset 0: Off
1: On
(53) Media type attributes
1 to 28 (Not used: 18, 19, 20)
Weight settings Fuser settings
0: Light 0: High
1: Normal 1 1: Middle
2: Normal 2 2: Low
3: Normal 3 3: Vellum
4: Heavy 1 Duplex settings
5: Heavy 2 0: Disable
6: Heavy 3 1: Enable
6: Heavy 4
6: Heavy 5
7: Extra Heavy
(54) Calibration information Black/Cyan/Magenta/Yellow
(55) Calibration information -
(56) Calibration information -
(57) Calibration information -
(58) Calibration information -
(59) Calibration information -
To Next Page
Loading...
