11-8 Time History Setup Model 831 Manual
Time History Increment 10 ms
When the selected time increment is 10 ms, the time
history options window will appear as shown in FIGURE
11-5 .
FIGURE 11-5 Time History Options Window: Time
Increment
10 ms
When using such short time increments, the only parameters
which can be stored are time history and Leq spectra.
However, with this we can implement millisecond “display
action”,Tms, which will time stamp the data with
millisecond resolution.
To enable this feature, highlight the Time History Options
section, press the
5 key, highlight the Tms box and press 4
or 6 key to place a check mark and press
5 once more.
When data is exported, the Tms data will appear in another
column, separate from the normal time stamp data, allowing
the use of Excel time and date formatting.
To Next Page
Loading...
