4-4 Setup Tabs Model 831 Manual
SLM Tab
The default values for these
parameters are as shown in
FIGURE 4-4.
FIGURE 4-4 SLM Tab
Selections of Frequency Weighting, Detector, Peak
Weighting and Integration Method are made one-at-a-time.
Click to highlight the desired section prior to making the
selection.
Use the arrow keys to highlight the appropriate item for the
selected parameter and press
5 to make the selection.
Frequency Weighting
A, C and Z frequency weightings are provided for the SPL
and peak detectors. These are selected separately.
Time Weighting
Available time weightings for the SPL detector are: Slow,
Fast and Impulse.
To Next Page
Loading...
