Lenze 8400 User Manual

15 Parameter reference
15.2 Parameter list
1036
Lenze · 8400 HighLine · Reference manual · DMS 12.0 EN · 06/2017 · TD23
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C00997
C00998
C00999
C01000
Parameter | Name:
C00997 | SLPSM: Filter cutoff frequency
Data type: INTEGER_16
Index: 23578
d
= 5C1A
h
From version 10.00.00
Sensorless control for synchronous motors (SLPSM)
Setting range (min. value | unit | max. value) Lenze setting
0.00 % 100.00 5.00 %
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 100
Parameter | Name:
C00998 | SLPSM: Filter time rotor position
Data type: INTEGER_16
Index: 23577
d
= 5C19
h
From version 10.00.00
Sensorless control for synchronous motors (SLPSM)
Setting range (min. value | unit | max. value)
0.5 ms 20.0
Subcodes Lenze setting Info
C00998/1 3.0 ms SLPSM
: Filter time rotor position
C00998/2 5.0 ms SLPSM
: Filter time actual speed value
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 10
Parameter | Name:
C00999 | SLPSM: PLL gain
Data type: INTEGER_16
Index: 23576
d
= 5C18
h
From version 10.00.00
Sensorless control for synchronous motors (SLPSM)
Setting range (min. value | unit | max. value) Lenze setting
0 % 1000 400 %
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1
Parameter | Name:
C01000 | MCTRL: Status
Data type: UNSIGNED_16
Index: 23575
d
= 5C17
h
From version 10.00.00
Display area (min. hex value | max. hex value)
0x0000 0xFFFF
Value is bit-coded: Info
Bit 0 SLPSM: Speed closed-loop control 1 ≡ The sensorless control for synchronous motors is in
the closed-loop controlled operation (|n
Setpoint
| >
n
C00996
).
Sensorless control for synchronous motors (SLPSM)
Bit 1 SLPSM: Speed open-loop control From version 12.00.00
1 ≡ The sensorless control for synchronous motors is in
the open-loop controlled operation (|n
Setpoint
| > n
C00996
).
Sensorless control for synchronous motors (SLPSM)
Bit 2 Motor ASM From version 12.00.00
1 ≡ Set motor type is "Asynchronous motor"
Bit 3 Motor PSM From version 12.00.00
1 ≡ Set motor type is "Synchronous motor"

Lenze 8400 Specifications

General

Category	DC Drives
Series	8400
Protection class	IP20
Control Type	Vector control
Communication	CANopen, PROFIBUS, Ethernet
Protection Features	Overcurrent, overvoltage, undervoltage, overtemperature
Input Voltage	AC 230/400/480 V