Lenze 8400 - Page 894

15 Parameter reference
15.2 Parameter list
894
Lenze · 8400 HighLine · Reference manual · DMS 12.0 EN · 06/2017 · TD23
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C00439
C00440
C00441
Parameter | Name:
C00439 | OxU/I: Input value
Data type: INTEGER_16
Index: 24136
d
= 5E48
h
Display of the input values for the analog outputs
Analog terminals
Display range (min. value | unit | max. value)
-199.99 % 199.99
Subcodes Info
C00439/1 O1U: Input value
• 100 % ≡ 10 V
C00439/2 O2U: Input value
• 100 % ≡ 10 V
C00439/3 O1I: Input value
• 100 % ≡ 20 mA
C00439/4 O2I: Input value
• 100 % ≡ 20 mA
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 100
Parameter | Name:
C00440 | LS_AnalogIn1: PT1 time constant
Data type: UNSIGNED_16
Index: 24135
d
= 5E47
h
PT1 time constant (S-ramp time) for the analog inputs
Analog terminals
Setting range (min. value | unit | max. value)
0 ms 1000
Subcodes Lenze setting Info
C00440/1 10 ms PT1 rounding AnalogIn1
C00440/2 10 ms PT1 rounding AnalogIn2
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1
Parameter | Name:
C00441 | Decoupling AnalogOut
Data type: UNSIGNED_16
Index: 24134
d
= 5E46
h
From version 04.00.00
Configuration defining the events that lead to a decoupling of the analog output terminals.
Configuring exception handling of the output terminals
Setting range (min. hex value | max. hex value) Lenze setting
0x0000 0xFFFF 0x0000 (decimal: 0)