Lexmark MS711 Service Manual

9 Do either of the following to clear the message and continue printing:
• For touch‑screen printer models, touch or Done.
• For non‑touch‑screen printer models, select Next > > Clear the jam, press OK > .
4yy paper jam messages
Error code Description Action
400.xx Invalid parameters during output option paper jam
411.01 Media remains detected by the output option
1/output expander sensor (pass through) after power
on.
Go to “Sensor (OE pass through) jam service check”
on page 204.
411.03 The media fed did not reach the output option
1/output expander sensor (pass through).
Go to “Output expander media entrance jam
service check” on page 208.
411.05 The media while feeding remains detected by the
output option 1/output expander sensor (pass
through).
Go to “Sensor (OE pass through) jam service check”
on page 204.
411.09 Never received Page In Output from output option
1/output expander
Go to “Output expander media entrance jam
service check” on page 208.
411.10 Invalid Page ID returned by output option 1/output
expander
Go to “Output expander media entrance jam
service check” on page 208.
411.41 Output option 1/output expander main/interface
motor stalled
Go to “Output expander main motor service check”
on page 202.
411.42 Output option 1/output expander main/interface
motor did not reach the required speed.
Go to “Output expander main motor service check”
on page 202.
411.43 Took too long to ramp up main/interface motor in
output option 1/output expander
Go to “Output expander main motor service check”
on page 202.
411.53 Output option 1/output expander main/interface
motor did not reach the required speed.
Go to “Output expander main motor service check”
on page 202.
411.71 Diverter failed to leave its home position on the
output option 1/output expander
Go to “Output expander diverter jam service check”
on page 211.
411.72 Diverter failed to reach its home position on the
output option 1/output expander
Go to “Output expander diverter jam service check”
on page 211.
414.01 Media remains detected by the output option
2/output expander sensor (pass through) after power
on.
Go to “Sensor (OE pass through) jam service check”
on page 204.
414.03 The media fed did not reach the output option
2/output expander sensor (pass through).
Go to “Output expander media entrance jam
service check” on page 208.
414.05 The media while feeding remains detected by the
output option 2/output expander sensor (pass
through).
Go to “Sensor (OE pass through) jam service check”
on page 204.
414.09 Never received Page In Output from output option
2/output expander
Go to “Output expander media entrance jam
service check” on page 208.
4063
Diagnostic information
130

Lexmark MS711 Specifications

General

Brand	Lexmark
Model	MS711
Category	Printer
Language	English