3 Turn on the printer.
4 Release the buttons after 10 seconds.
Roller Kit Counter Value
When this setting is selected, the printer displays the current value for the Roller Kit counter. A print job containing a
single page increments the counter by one and a duplex page by two. When the value has reached the rated life of the
Roller Kit, it reminds the customer that scheduled maintenance is required. Reset this counter after an 81 Replace
Roller Kit message displays and a Roller Kit is installed. See “Reset Roller Kit Counter” on page 342.
To view the maintenance kit count:
1 From the Configuration menu, navigate to Roller Kit Counter Value.
The value is displayed and cannot be changed.
2 Press Back or X to return to the Configuration menu.
Reset Roller Kit Counter
After scheduled maintenance, the roller count value must be reset to zero.
To reset the maintenance count value to zero:
1 From the Configuration menu, navigate to Reset Roller Kit Counter.
2 Depending on the printer model, press OK or touch to reset the counter, or press X to exit without resetting
the counter.
Once initiated, the reset operation cannot be canceled. When the operation is complete, the menu returns to the main
Configuration Menu.
Print Quality Pages
This option is a limited version of the Print quality pages setting that appears in the Diagnostics menu. See “Print Quality
Pages (Prt Quality Pgs)” on page 325. This setting reports the values of a broad range of printer settings and tests the
ability of the printer to generate acceptable printed output.
To print the report:
1 From the Configuration menu, navigate to Print Quality Pages.
2 Depending on the printer model, press OK or touch to print the pages, or press X to exit without printing the
pages.
Printing Quality Test Pages appears on the display. Once started, the printing cannot be canceled and
no buttons are active until the printing completes.
4063
Service menus
342
To Next Page
Loading...
Need help?
General
