Assembly 14: High capacity input tray option 2
Asm-index P/N Units/mach Units/FRU Description Removal procedure
1 40X8178 1 1 Sensor (HCIT pick) with cable “Sensor (HCIT pick) removal” on
page 550
2 40X8177 1 1 Sensor (HCIT media low) with flag “Sensor (HCIT media low) with flag
removal” on page 547
3 40X8174 1 1 HCIT media feeder “HCIT media feeder removal” on
page 551
4 40X8180 1 1 HCIT interface cable “HCIT interface cable removal” on
page 546
5 40X8173 1 1 HCIT controller PCBA “HCIT controller PCBA removal” on
page 541
6 40X8179 1 1 HCIT lift drive motor “HCIT lift drive motor removal” on
page 544
7 40X8169 1 1 HCIT right cover “HCIT right cover removal” on
page 539
8 40X7592 1 1 Sensor (HCIT pick roller position) “Sensor (HCIT pick roller position)
removal” on page 548
9 40X7593 1 1 HCIT pick roller assembly “HCIT pick roller assembly removal”
on page 535
10 40X8171 1 1 HCIT front cover “HCIT front cover removal” on
page 533
11 40X7713 1 1 HCIT separator roller assembly “HCIT separator roller assembly
removal” on page 532
12 40X8176 1 1 HCIT media guide “HCIT media guide removal” on
page 532
13 40X8167 1 1 HCIT left cover “HCIT left cover removal” on page
537
4063
Parts catalog
836
To Next Page
Loading...
Need help?
General
