Page 68 of 237
Version: 5.1.6 – June 4
th
, 2019
For a detailed description of the Network – WAN settings, please see section “Network – WAN”
As in the example shown, select Static IP.
This setting also requires a DNS server (see Network – DNS server).
Here, enter the IP address of the mbNET connected to the WAN port.
In the example: 192.168.1.100
Enter the subnet mask.
In this case: 255.255.255.0
Enter details of the gateway that connects you to the Internet, i.e. the IP address
of the existing router.
In this case: 192.168.1.1
Configuring the router for connection to the Internet via an existing router
To Next Page
Loading...
