MB Connect Line mbNET Series - Page 76

Page 76 of 237
Version: 5.1.6 – June 4
th
, 2019
Setting up the router for a VPN connection (continued)
 Here, enter either the DynDNS service forwarding
name, or the current IP address of the router.
Note:
 The example in Figure 86 uses an IP address assigned by
the ISP.
For information on setting up and using the MB Connect Line DynDNS service, please see
section Network – DynDNS
When entering the router’s IP address, make sure that you always enter the current IP address (the IP ad-
dress changes every time the router connects to the Internet).
 Now you can select if the connection should be
created for all users or only for the current
user.
 Now add a desktop shortcut to the connection.
 The VPN connection is now set up.