Mercury 200 OptiMax Jet Drive Service Manual

Pump Unit
90-8M0050731 MAY 2011 Page 5A-35
6. Pull the impeller shaft from the drive housing.
45280
7. Remove the bearing retaining ring from the drive housing.
45281
8. Remove the bearing using the bearing puller.
45282
Bearing Puller Assembly 91‑ 83165T
9. Remove the impeller shaft seals using the slide hammer and puller jaws.
Slide Hammer
91‑34569A 1

Mercury 200 OptiMax Jet Drive Specifications

General

Brand	Mercury
Model	200 OptiMax Jet Drive
Category	Outboard Motor
Language	English