Minebea Intec X3 Process Indicator PR 5410 - Page 215

7.17.1.5 EW-Com protocol
4. Select [Baudrate] and conrm.
A selection window opens.
5. Select the desired transmission speed and conrm.
6. Press two times to exit the menu and save.
1. Select [EW-COM] and conrm.
A selection window opens.
2. Select the desired interface and conrm.
The selected interface is displayed.
3. Press the [Param] softkey to set the parameters.
7 Commissioning X3 Process Indicator PR 5410
EN-213 Minebea Intec