Minebea Intec X3 Process Indicator PR 5410 - Page 24

Indicator keys
Taring
The current gross weight is stored in
the tare memory, provided that
- weight value is stable;
- the instrument is not in error sta-
tus.
This function depends on the congu-
ration.
Navigation/menu keys
Scroll up in the menu. Conrm input/selection.
Scroll down in the menu. - Backspace
- Pressing the delete key deletes indivi-
dual characters (within an entry).
- Cursor to the left
- Selection
- Cancel entry/selection (after a conr-
mation prompt) without saving the ch-
ange.
- Exit parameters/menu window.
- Cursor to the right
- Selection
Function keys/softkeys
Access the Setup menu.
Depending on the settings under
-[Weighingpoint]- [Calib]- [Param]- [Test
mode] the following is displayed by calling
the test with the key later on:
- with "Absolute" the maximum load
- with "Relative" the deviation from test
value.
Information on version number, tted
hardware, 10-fold resolution
Softkeys 1…5
Select appropriate menu function, see also
Chapter 3.4.4.2.
No function
X3 Process Indicator PR 5410 3 Device description
Minebea Intec EN-22