Minebea Intec X3 Process Indicator PR 5410 User Manual

Alphanumeric keypad
Toggle key
Toggle by pressing:
- between alpha and numerical mode
- during conguration between weight units
Pressing once displays the corresponding rst character, e.g.,"A",
at the cursor position. After pressing twice, "B" is displayed at the
cursor position and after pressing three times, "C" is displayed.
Press the cursor key to nish entering a character or wait
approx. 2 seconds.
If only numeric values are required for input, letters are not enab-
led.
Press the cursor key within an entry to return to the previous
character.
Press the cursor key within an entry to select the next charac-
ter.
Within an input, pressing the delete key deletes the character
to the left of the cursor.
Input eld
In principle
If alphanumeric characters are already present in the input eld of
the selected line, they will be completely overwritten after imme-
diate entry.
If alphanumeric characters are already present in the input eld of
the selected line, you can press the cursor key to select the
characters to be overwritten and overwrite them.
3 Device description X3 Process Indicator PR 5410
EN-23 Minebea Intec

Minebea Intec X3 Process Indicator PR 5410 Specifications

General

Brand	Minebea Intec
Model	X3 Process Indicator PR 5410
Category	Touch Panel
Language	English