Mitutoyo HR-530 Series - Test Position Registration

No. 99MBG518A
C-30
PART C : 4 Method to Fix the Test Position and Test
4.8
Test Position Registration
Register the coordinates of the test position.
1
Touch the home tab of the "condition setup" tab block.
» The home screen is displayed.
2
Touch the position input button.
» The coordinate list editing screen is
displayed.
3
Input the coordinates.
1 Touch the [Add.] button.
» Thecoordinatesoftherstpointare
added to the list.
Tips
Coordinates can also be read from USB
memory.
For details about the coordinate list editing
screen, see
"1.5.1 X-Axis Position Set-
ting" (page G-12) in "PART G Settings".