Mitutoyo HR-530 Series - Executing the Test; Executing the Test (First Point

No. 99MBG518A
F-22
PART F : 3 Method to Set a Group and Test Multiple Points
3.10
Executing the Test
3.10.1 Executing the Test (First Point)
Executethersttest.
CAUTION
Whenoperatingthespecimenstage,donotputyourhandsorngersundertheindenter.Theymaybecome
pinched.
1
Touch the home tab of the "condition setup" tab block.
» The home screen is displayed.
Tips
Tests cannot be executed unless the home
screen is displayed.
2
Slowly turn the up/down handle clockwise until the automatic brake engages and the up/down
handleisxed.
Tips
Whentheup/downhandleentersthexedposition,removeyourhandfromtheup/downhandle.
» The test is executed.
3
Remove the specimen after completing the test.