Mitutoyo HR-530 Series - Connection of Various Cables; Full System Connection

No. 99MBG518A
B-9
PART B : 4 Connection of Various Cables
4
Connection of Various Cables
This chapter explains the connection to the power supply, display unit, PC, and various other
devices.
4.1
Full System Connection
CAUTION
• A Mitutoyo service engineer will connect each connector and perform the wiring during delivery and instal-
lation. In the event a connector becomes disconnected, the connector needs to be connected as shown in
the diagrams. If you have any questions or concerns about the connection of each connector or the wiring,
contactthenearestMitutoyosaleso󰀩ce.
• Disconnect the power cable from the power input connector of the testing machine when connecting each
connectorandperformingwiring.Conrmtheuser'smanualforeachdeviceandperformtheprocedures
aftershuttingo󰀨thepowersupply.Checkwhetherthewiringbetweenconnectorsiscorrect,allthewires
have been connected, and whether there are any poor connections when making connections to connect the
connectors.
①
② ③
No. Name Function
①
Display unit connector Use the display unit connecting cable to connect the display unit.
②
Connector for USB output Use the USB communication cable to connect a PC.
③
Power input connector Use the power cable to connect the AC power supply.