Mitutoyo HR-530 Series - Execution Condition Settings

No. 99MBG518A
G-33
PART G : 3 Execution Conditions
3.4
Settings
The settings in the execution condition are displayed.
For a description of each setting, see the settings of each execution condition.
①
②
③
④
⑤
⑥
⑦
No. Name Details
①
Conversion Displays the conversion settings that are set.
"3.1 Conversion Settings" (page G-27)
②
GO/NG Enables and disables the GO/NG judgment that is set.
"3.2.1 GO/NG Judgment" (page G-28)
③
Upper Displays the upper limit set in the GO/NG judgment.
"3.2.1 GO/NG Judgment" (page G-28)
④
Lower Displays the lower limit set in the GO/NG judgment.
"3.2.1 GO/NG Judgment" (page G-28)
⑤
USB DisplaystheUSBoutputsettingthatisspecied.
"3.3 External Output" (page G-30)
⑥
Serial Displays the settings of the serial output that are set.
"3.3 External Output" (page G-30)
⑦
SPC Displays the settings of the SPC output that are set.
"3.3 External Output" (page G-30)