Mitutoyo HR-530 Series - Test for the Specimen for Obtaining the Correction Value; Setting the Specimen for Obtaining the Correction Value

No. 99MBG518A
D-10
PART D : 2 Method to Test One Point
2.7
Test for the Specimen for Obtaining the Correction
Value
Execute the test with the specimen for obtaining the correction value.
2.7.1 Setting the Specimen for Obtaining the Correction Value
Set the specimen for obtaining the correction value on the specimen stage.
CAUTION
Whenoperatingthespecimenstage,donotputyourhandsorngersundertheindenter.Theymaybecome
pinched.
1
Turn the up/down handle counterclockwise to lower the specimen stage.
2
Place the specimen for obtaining the correction value on the specimen stage.