Mitutoyo HR-530 Series - Statistical Display Details

No. 99MBG518A
G-36
PART G : 4 Results
4.1
Statistical Display
Touch the [Result] tab, and then touch the statistical display button ( ) at the bottom of the screen.
①
③
⑤ ⑥ ⑦ ⑧ ⑨
②
④
No. Name Details
①
[Sample No.]/[Group] [Sample No.]: Displays the number of samples/maximum number of
samples. Touch this button to change the number of samples.
[Group]: Displays the number of groups that have been measured/the
maximum number of samples.
②
File Name DisplaysthelenamesavedtotheUSBmemoryorloadedfromthe
USBmemory.Touchthisbuttontochangethelename.
③
Statistical display Displays the following results obtained by running a statistical calcu-
lation:
Maximum,minimum,average,dispersion,standarddeviation(σn-1,σn),
upper/lower limit (setting values), and judgment numbers (+NG, -NG,
and GO)
④
[HD Chart] button Displays the line graph, histogram, and X-R graph.
This button becomes active if there are measurement results for three
or more tests.
X-R graph is active only when the group measurement is enabled.
For details, see "4.2.1 Hardness Chart" (page G-40).
⑤
List display button Displays the test results in a list.
For details, see "4.2 List Display" (page G-38).
⑥
Read button Loads data from the USB memory.
Theimportformat(extension)isaBIN(binary)le.
⑦
Savebinaryleand
textlebutton
Saves data to the USB memory.
ThedataissavedinbothBIN(binary)andTXT(text)leformats.
⑧
Savebinarylebutton Saves data to the USB memory.
TheformattosaveistheBIN(binary)leformat.
⑨
External output button Outputs data to the external output device set to manual or automatic
in the external output settings.