Mitutoyo HR-530 Series - Drawing Settings for Hardness Chart

No. 99MBG518A
G-42
PART G : 4 Results
No. Name Details
⑨
Cpk Displays the process capability index.
Cpk = min [
SU – AVR
,
AVR – SL
]
3 × σ 3 × σ
⑩
[HD Chart] button Displays the hardness chart (line graph).
For details, see "4.2.2 Histogram" (page G-41).
⑪
[Histogram] button Indicates that this screen displays the histogram.
⑫
[X-R graph] button Displays the X-R graph. This is active only when the group mea-
surement is enabled.
For details, see "4.2.4 X-R Graph" (page G-44).
⑬
Save button Savesahardcopyofthescreen(BMPle)totheUSBmemory.
⑭
[Drawing Setting] button Speciesthemethodtodisplaythegraph.
For details, see "■Drawingsettingsforthehistogram"(page
G-43).
⑮
Exit button Closes the histogram.
4.2.3 Drawing Settings
Set the graph display settings for the hardness chart (line graph) and the histogram.
■Drawing settings for the hardness chart (line graph)
Drawingsettingscanbespeciedforthehardnesschart(linegraph).
② ③
①
④
⑥
⑧
⑤
⑦
⑨
No. Name Details
①
Hardness chart Indicates the graph to set in the drawing settings on this screen.
②
[Auto] button Setting for automatically drawing a graph.
The axis drawing settings cannot be set if set to automatic.
③
[Manual] button Touch this button to specify the axis drawing setting in this screen.
④
[H begin] button Enters the start value of the horizontal axis to draw (left end value).
Enter a value when the number keys are displayed.
⑤
[H end] button Enters the end value of the horizontal axis to draw (right end value).
Enter a value when the number keys are displayed.
⑥
[V begin] button Enters the minimum value of the vertical axis to draw (bottom end
value).
Enter a value when the number keys are displayed.
The start position of the vertical axis is in the bottom left of the
graph.