Mitutoyo HR-530 Series - GO;NG Judgment Settings; Setting the Specimen

No. 99MBG518A
C-10
PART C : 2 Method to Test One Point
2.7
GO/NG Judgment Settings
Set the GO/NG judgment for test results as necessary.
When you set the GO/NG judgment, GO/NG is displayed in the test results.
For details about GO/NG judgment, see
"3.2.1 GO/NG Judgment" (page G-28) in "PART G Settings".
2.8
Setting the Specimen
Set the specimen on the specimen stage.
CAUTION
Whenoperatingthespecimenstage,donotputyourhandsorngersundertheindenter.Theymaybecome
pinched.
1
Turn the up/down handle counterclockwise to lower the specimen stage.
2
Place the specimen on the specimen stage.