No. 99MBG518A
F-10
PART F : 2 Method to Test One Point
2.6
Correction Value Settings
Set a correction value as necessary.
Set it in advance when an error occurs in test results between testing machines or operators, etc.
For details about correction values, see
"2.3 Correction" (page G-23) in "PART G Settings".
2.7
GO/NG Judgment Settings
Set the GO/NG judgment for test results as necessary.
When you set the GO/NG judgment, GO/NG is displayed in the test results.
For details about GO/NG judgment, see
"3.2.1 GO/NG Judgment" (page G-28) in "PART G Settings".
To Next Page
Loading...
