Mitutoyo HR-530 Series - Executing Continuous Tests

No. 99MBG518A
C-37
PART C : 5 Executing Continuous Tests
5
Executing Continuous Tests
There is no need to lower the specimen stage after a test execution if tests are performed continuously.
This is convenient when testing multiple points.
CAUTION
Whenoperatingthespecimenstage,donotputyourhandsorngersundertheindenter.Theymaybecome
pinched.
1
Touch the home tab of the "condition setup" tab block.
» The home screen is displayed.
Tips
Tests cannot be executed unless the home
screen is displayed.
2
Touch the [Continuous] button.
» The [Continuous] button is displayed in
blue. (Continuous testing is enabled.)
Tips
An example on the home screen is the list
average screen.