Mitutoyo HR-530 Series - Test Results Output Format

No. 99MBG518A
K-6
PART K : 2 External Output
2.4.2 Test Results
① Test number, ② Hardness value, ③ Conversion scale, ④ GO/NG judgment, ⑤ Max. depth, ⑥
Group, ⑦ X-axis coordinate, ⑧ Y-axis coordinate, ⑨ Indent diameter D1, ⑩ Indent diameter D2
Tips
• When the items ③, ④, ⑤, or ⑥ are set to OFF, a blank is output.
If there is no further data, output will not occur.
• The items
⑦ and ⑧areoutputwhenthene-adjustmenttableforJominytestingoptionalaccessoryandthe
stage are connected in multiple-point testing.
In other cases, a blank is output.
• The items
⑨ and ⑩ are output when the Brinell hardness test (HB) is selected.
For tests other than the Brinell hardness test, a blank is output.