Mitutoyo HR-530 Series - Other Specifications

No. 99MBG518A
J-4
PARTJ:1MainSpecications
1.2
Others
Code HR-530 HR-530L
Code No.
810-233-20/810-233-21/
810-233-23
810-333-20/810-333-21/
810-333-23
External output Serial 1 CH for a printer (RS-232C compliant)
Digimatic data
output
1 CH for the Digimatic interface output for Digimatic devices
Digimatic data
input
1 CH for Digimatic scale unit input
USB2.0 1 CH for PC communication
1CHforUSBashmemory(attachedtothedisplayunit)
Power supply Automatically selects the following:
100 VAC/120 VAC/220 VAC/240 VAC
Vibration
conditions
Acceleration 0.5 Gal or less
Frequency Less than 5 Hz
NOTICE
Dampen any vibrations 5 Hz or higher using a vibration isolator.
Temperature
range/humidity
Operating tem-
perature range
5 °C through 40 °C
Vericationand
calibration tem-
perature
23°C±5°C
Operating humid-
ity range
80%orlessandwithnocondensation(60%±5%isrecom-
mended)
Storage tempera-
ture (humidity)
-10 °C through 50 °C (5 % through 90 % non-condensation)
Exterior
dimensions
(W × D × H)
Main unit of the
testing machine
250 × 667 × 621 mm 300 × 667 × 766 mm
Display unit 191 × 147 × 71 mm
Mass Main unit of the
testing machine
Approx. 60 kg Approx. 69 kg
Display unit Approx. 1.1 kg
CE marking EMC Directive: EN 61326-1
Immunity test requirement: Clause 6.2 Table 2
Emission limit: Class A
Low voltage Directive: EN 61010-1
RoHS Directive: EN IEC 63000