No. 99MBG518A
G-53
PART G : 5 System Conditions
5.4
Equipment
No. Name Details
①
Admin. mode Switches between ON and OFF.
When set to ON, the operation described in this manual is possible.
When set to OFF, settings cannot be changed.
To set the administrator mode to ON again, touch
on the home
screen and enter the password.
After entry, the administrator mode will turn on.
The password is 3214.
②
Beep Switches between ON and OFF.
When set to ON, touching the screen makes a beep.
When set to OFF, no sound is made.
However, an alarm will sound in serious situations where a mistaken
operation might result in device failure or similar occurrence.
③
Sleep Switches between ON and OFF.
When set to ON, the time until sleep can be set.
A range of 1–60 minutes can be set. If the screen of the display unit
is not touched or testing is not performed during the set duration, the
displayofthedisplayunitturnso.
To Next Page
Loading...
