Mitutoyo HR-530 Series - Procedure to Affix the Protective Sheet for the Display Unit

No. 99MBG518A
B-13
PARTB:5ProceduretoA󰀩xtheProtectiveSheetfortheDisplayUnit
5
ProceduretoA󰀩xtheProtective
Sheet for the Display Unit
Thischapterexplainstheproceduretoa󰀩xtheprotectivesheettothedisplayunitofthe
HR-530 series.
5.1
ProceduretoA󰀩xtheProtectiveSheetfor
the Display Unit
NOTICE
Correctlya󰀩xtheprotectivesheetforthedisplayunitsothatitdoesnotprotrudeoutsidetheframeofthe
displayunit.Usecautionasthedisplayunitmaynotoperateiftheprotectivesheetisnota󰀩xedcorrectlywithin
the frame.
1
Wipe clean the touch panel part of the display unit with a dry cloth.
2
Peelo󰀨theseparator(protectivematerialcoveringtheadhesivesurface)attachedtothepro-
tective sheet for the display unit.
3
A󰀩xtheprotectivesheetforthedisplayunittothesurfaceofthedisplayunit.