No. 99MBG518A
A-6
PART A : 2 Part Names
2.4
Display Unit
The screen consists of the following three blocks.
No. Name Details
①
"Condition setup" tab block Touch each tab to move to the screen for setting test conditions,
execution conditions, results, system conditions, etc.
②
"Information" block Displays various conditions and test results. On the home screen,
you can switch to a screen layout that matches the work environ-
ment by changing the display format.
③
"Basic operation" block Perform tests, save/read system conditions, display the details
screen, etc.
To Next Page
Loading...
