No. 99MBG518A
E-31
PART E : 3 Method to Set a Group and Test Multiple Points
3.9
Correction Value Setup
Set up the test results (correction value) of the test blocks.
1
Touch the [Test] tab of the "condition setup" tab block.
» The Test settings screen is displayed.
List average screen List screen
2
Touch the [Setup] button.
» The Setup screen is displayed.
3
Touch the [import] button.
» The test results (correction value) ob-
tained through "3.8 Testing the Test
Block" are displayed.
Tips
The correction value can also be read from
USB memory.
To Next Page
Loading...
