Mitutoyo HR-530 Series - Optional Accessories; Specimen Stages; Printer Types

No. 99MBG518A
J-7
PART J : 3 Optional Accessories
3
Optional Accessories
3.1
Specimen Stage
Code No. Item name Note
810-700 Fine-adjustment table for Jominy testing mm Metric system
810-701 Fine-adjustment table for Jominy testing in/mm Inch/metric system
810-027 Adjustable arm support
810-028 Adjustable support
810-029 V-anvil, 50mm groove width Length 400 mm, width of
grooves 50 mm
810-030 Diamond spot anvil Outer diameter ø10 mm
(onlyforusewiththesupercial
hardness testing machine)
810-037 Round table, 180mm dia. Outer diameter ø180 mm
810-038 Round table, 250mm dia. Outer diameter ø250 mm
810-040 V-anvil, 30mm groove width Outer diameter ø40 mm, width of
grooves 30 mm
810-041 V-anvil, 6mm groove width Outer diameter ø40 mm, width of
grooves 6 mm
810-042 V-anvil, 8mm groove width Outer diameter ø10 mm
810-043 Spot anvil, 12mm dia. Outer diameter ø12 mm
810-044 Spot anvil, 5.5mm dia. Outer diameter ø5.5 mm
3.2
Types of Printers
Code No./
part No.
Item name Note
264-505 Digimatic Mini-Processor DP-1VA LOGGER Cable sold separately
12AAJ112 PC cable For DP-1VA, 1m
06AFM380D USB input tool direct USB-INT-D
264-016-10 Input tool IT-016U
936937 Connection cable For IT-016U
02AZD810D U-WAVE-R
02AZD730G U-WAVE-T IP67 type
02AZD880G U-WAVE-T Buzzer type
02AZD790G Connecting cable only for use with U-WAVE-T