Mitutoyo HR-530 Series - Scale Settings

No. 99MBG518A
C-8
PART C : 2 Method to Test One Point
2.3
Scale Settings
Set the scale for the hardness value.
1
Touch the [Test] tab of the "condition setup" tab block.
» The Test settings screen is displayed.
2
Set the scale.
1 Touch the [Scale] button on the "basic
operation" block.
» The Scale settings screen is displayed.
2 Touch the Scale button.
» The Scale selection screen is displayed.
Tips
You can also set the scale by touching the
[Indent] or [Force] button.
3 Touchthe[HRA]button→[OK]button
in order.
For details about scale, see
"2.1 Scale" (page G-13) in "PART G
Settings".