Mitutoyo HR-530 Series - Executing the Test (Second Point

No. 99MBG518A
E-1 2
PART E : 2 Method to Test One Point
2.7.2 Executing the Test
Execute the test with the test block.
CAUTION
Whenoperatingthespecimenstage,donotputyourhandsorngersundertheindenter.Theymaybecome
pinched.
1
Touch the home tab of the "condition setup" tab block.
» The home screen is displayed.
Tips
Tests cannot be executed unless the home
screen is displayed.
2
Slowly turn the up/down handle clockwise until the automatic brake engages and the up/down
handleisxed.
Tips
Whentheup/downhandleentersthexedposition,removeyourhandfromtheup/downhandle.
» The test is executed.
Tips
The background color of the hardness value is yellow when you are performing a test to obtain the correction
value.
Standard screen Simple screen