Mitutoyo HR-530 Series - Scale Settings; Mounting the Indenter; Test Time Settings; Correction Value Settings

No. 99MBG518A
C-17
PART C : 3 Method to Set a Group and Test Multiple Points
3.3
Scale Settings
Set the scale for the hardness value.
For details about setting methods, see
"2.3 Scale Settings" (page C-8).
3.4
Mounting the Indenter
Mount the indenter set in "3.3 Scale Settings" to the main unit of the testing machine.
For details about mounting the indenter, see
"3 Inspection and Replacement of Consumable Parts"
(page H-5) in "PART H Inspection and Maintenance".
3.5
Test Time Settings
Set the test time.
For details about setting methods, see
"2.5 Test Time Settings" (page C-9).
3.6
Correction Value Settings
Set a correction value as necessary.
Set it in advance when, for example, a specimen with a curved surface (specimen such as a cylindrical
shape) or an error occurs in test results between testing machines or operators.
For details about correction values, see
"2.3 Correction" (page G-23) in "PART G Settings".
3.7
GO/NG Judgment Settings
Set the GO/NG judgment for test results as necessary.
When you set the GO/NG judgment, GO/NG is displayed in the test results.
For details about GO/NG judgment, see
"3.2.1 GO/NG Judgment" (page G-28) in "PART G Settings".