Mitutoyo HR-530 Series - Test Flow; Method to Test One Point

No. 99MBG518A
C-1
PART C : 1 Test Flow
1
Test Flow
1.1
Method to Test One Point
Thissectionexplainstheoperationowtotestonepoint.
Preparation
Test method settings
"2.1 Test Method Settings" (page
C-6)
Display conditions settings
"2.2 Display Conditions Settings"
(page C-7)
Scale settings
"2.3 Scale Settings" (page C-8)
Indenter mounting
"2.4 Mounting the Indenter" (page
C-9)
Test time settings
"2.5 Test Time Settings" (page
C-9)
■When setting a correction value
Correction value settings
"2.6 Correction Value Settings"
(page C-9)
■When setting a GO/NG judgment
GO/NG judgment settings
"2.7 GO/NG Judgment Settings"
(page C-10)
Test
Specimen set
"2.8 Setting the Specimen" (page
C-10)
Test execution
"2.9 Executing the Test" (page
C-12)
Conrmationoftestresults
"2.10ConrmingtheTestResults"
(page C-14)