Mitutoyo HR-530 Series - Installation Space

No. 99MBG518A
B-5
PART B : 2 Installation Space
2
Installation Space
A Mitutoyo service engineer will install and set up this system.
Thefollowingshowsexamplesofthestandardoorspacenecessarytoinstallthesystem.
NOTICE
If a clearance hole for the specimen stage has not been cut in the installation surface of the testing machine,
the maximum height of specimens is limited.
Tosatisfythemaximumspecimenheightinthespecications,youneedtoeitherusethesteelstandoptional
accessory or cut a hole in the installation surface. For details about the steel stand, see
"3 Optional Accesso-
ries"(pageJ-7)in"PARTJSpecications"andcontactthenearestMitutoyosaleso󰀩ce.
Min 600 Min 600600 Min 600 Min 600600
(560) 782
900
100
Min 600
Min 100
900
100
Min 600
Min 100
(560) 927
HR-530 HR-530L