No. 99MBG518A
G-19
PART G : 2 Test Conditions
2.2.2 Brinell Hardness Test
No. Name Details
①
Force The test force that is displayed varies according to the diameter of the ball.
The diameter and test force are displayed.
Example: 1/30 represents a ball diameter of 1 mm and a test force of 30.
②
Time There are two types of time settings available.
For the range of settings, see "■Relationshipbetweenthetestcycle
and time".
■Relationship between the test cycle and time
t
1
2
Display name Description Setting range
1 Load Touching specimen to total test force loading time 2–10 sec.
2 Duration Total test force retention time 1–120 sec.
To Next Page
Loading...
