Mitutoyo HR-530 Series - Power Supply

No. 99MBG518A
B-3
PART B : 1 Installation Environment
1.6
Power Supply
Preparea100V–240VAC±10%50/60Hzpoweroutlet(twoplugoutletwithgrounds).
Ensure an electrical power supply with more capacity than the required amount for this system.
NOTICE
Thisproductmaybea󰀨ectedbynoisefrompowersuppliesforotherequipment.
Use a power outlet dedicated to this product in the installation area. Do not share the power outlet with other
equipment.
Distribution method Single phase, 2-wire.
One wire is grounded.
Voltage •100V–240VAC±10%
*1
• Overvoltage Category II
• Pollution Degree 2
• Class I Equipment
Frequency 50/60 Hz
Electrical power consumption 30 W
Number of outlets 1 outlet
*1 If the power supply voltage drops below 90 V due to voltage dips, short interruption to the power
supply,oructuationsinthepowersupply,asystemshutdownorerrorssuchasthosedescribedin
Troubleshooting may occur.
Ifanerroroccurs,conrmthecause,andthentakemeasuresaccordingtoTroubleshooting.
Tips
• The power distribution system, voltage and electrical power, frequency, and electrical power consumption
di󰀨erslightlyaccordingtothedevicesuchasaprinter.Fordetails,seetheuser'smanualsforthedevices
such as a printer.
• Aconstantvoltagepowerunitmayberequiredifthepowersupplyuctuationsdonotsatisfythespecied
voltage. An uninterruptible power supply may be required if there is concern about power interruptions. For
details,contactthenearestMitutoyosaleso󰀩ce.