Mitutoyo HR-530 Series - X-Axis Position Setting

No. 99MBG518A
G-12
PART G : 1 Home Screen
Tips
• Even if a test is canceled or an error occurs after a test starts, the multi-point test moves to the next test
because an indent may have been made in the specimen.
Ifcontinuoustestingisselected,thetestingcanbesetonlyattherstpointinamulti-pointtest.The[Contin-
uous]buttononlyfunctionsontherstpoint.
• The tests are performed in order of their numbers in the list display.
• Even if a portion of the test data is deleted from the results screen, the portion of the test data that was delet-
ed is still displayed in the list display.
1.5.1 X-Axis Position Setting
①
⑥
⑧
③
⑤
②
⑦
④
⑨
No. Name Details
①
Settings list Displays the setting number and the position of the X-axis.
The background of the line that is selected is displayed in blue.
Touch a line to select the line.
②
[Add.] button Adds a new setting number.
③
[X] button Used to enter the position for the X-axis of the line that is selected
in the settings list.
④
Delete button Deletes the line that is selected in the settings list.
⑤
Delete all button Deletes all of the lines in the settings list.
⑥
Read button Loads setting values from a USB device.
⑦
Save button Saves the settings data to a USB device.
⑧
Coordinate tolerance
button
Sets the threshold when the positions of coordinates are adjusted.
⑨
[OK] button Conrmsthesettings.