Mitutoyo HR-530 Series - Main Unit Specifications

No. 99MBG518A
J-1
PARTJ:1MainSpecications
1
MainSpecications
1.1
Main Unit of the Testing Machine
■Hardness test function
Code HR-530 HR-530L
Code No. 810-233-20/810-233-21/810-233-23 810-333-20/810-333-21/810-333-23
Test method and
applied standards
Rockwell/Rockwellsupercial
JIS B7726:2017, ISO 6508-2:2015
ASTM E18-20 (only applies to hardness, test force, and indent depth)
Brinell (indenting only)
JIS B7724:2017, ISO 6506-2:2014, ASTM E10-18
Plastic 1
JIS K7202-2:2001, ISO 2039-2:1987, ASTM D785-08 (2015) Procedure A
Plastic 2
ASTM D785-08 (2015) Procedure B, JIS K7202-2:2001 Annex A,
ISO 2039-2:1987 Annex A
Indent depth Brinell
VDI/VDE 2616:2012 Part 1
Test force Rockwell hardness test
Preliminary test force Total test force
N 98.07 588.4 980.7 1471
(kgf) 10 60 100 150
Scale HRA, HRD, HRC, HRF*, HRB*, HRG*, HRH*, HRE*, HRK*,
HRL*, HRM*, HRP*, HRR*, HRS*, HRV*
Rockwellsupercialhardnesstest
Preliminary test force Total test force
N 29.42 147.1 294.2 411.3
(kgf) 3 15 30 45
Scale HR15N, HR30N, HR45N, HR15T*, HR30T*, HR45T*,
HR15W*, HR30W*, HR45W*, HR15X*, HR30X, HR45X,
HR15Y*, HR30Y*, HR45Y*