Mitutoyo HR-530 Series - System Operation Problems

No. 99MBG518A
I-1
PART I : 1 System Operation
1
System Operation
If you encounter any problems other than those listed below, contact your dealer or the nearest Mitutoyo
saleso󰀩ce.
Issue Check point Solution
1
Power is not supplied
when the power switch
is turned on.
Is the power cable securely
connected?
Connect the power cable securely.
Is power supplied to the power
outlet?
Connect another electric appliance
to the power outlet to check the
power supply.
2
The machine acted
erratically.
Are all cables connected cor-
rectly?
Connect the cables correctly.
3
An abnormal sound or
vibration is generated.
Are the supporting legs of the
product installation base tight-
ened?
Install the product securely.
Are the product and the instal-
lation base level?
Leveling by a Mitutoyo service engi-
neer is required.
4
Data cannot be saved
in USB memory.
Is the USB memory inserted in
the slot properly?
Retry measurement after restarting
the product, and save data to the
USB memory again.
5
The power suddenly
turnso󰀨.
Is the power cable securely
connected?
Connect the power cable securely.
Has instantaneous power fail-
ure or temporary power failure
occurred?
Examine the power supply.
If other equipment is receiving pow-
er from the same power outlet, use
adi󰀨erentpoweroutletfortheother
equipment.