Mitutoyo HR-530 Series - Part Names; Exterior of the Main Unit of the Testing Machine

No. 99MBG518A
A-3
PART A : 2 Part Names
2
Part Names
2.1
Exterior of the Main Unit of the Testing Machine
①
⑪
②
⑫
③
⑬
④
⑭
⑤
⑮
⑥
⑦
⑧
⑨
⑩
No. Name Function
①
Display unit Sets conditions and displays information necessary for hardness
testing.
②
Loading arm An indenter is mounted on the tip, and vertical movement is driven
by a motor.
③
Indenter Forms an indent when it contacts the specimen.
④
Lighting Automatically turns on when the testing machine is turned on.
⑤
Anvil A table for placing specimens.
⑥
Vertical shaft Used to attach the anvil.
⑦
Bellows Cover that prevents dust from entering the vertical shaft. Testing
can be performed without the bellows.
⑧
Up/down handle Turning the handle clockwise or counterclockwise raises or lowers
the specimen stage.
⑨
Front switch panel Where the necessary keys are located for operating the main unit of
the testing machine.
⑩
Leveling bolts Bolts for leveling the testing machine.
⑪
Fall-prevention bolts Bolts that support the leveling bolts.
⑫
LED switch Turnsthepowerofthetestingmachinemainuniton/o󰀨.Lightsup
when the power of the testing machine is on.
⑬
Displayunitxingplate Can be used to mount the display unit onto the main unit of the
testing machine.
⑭
Power switch Themainpowerswitch.Turnthepowero󰀨ifthemachinewillnotbe
used for an extended period of time.
⑮
Power input connector Connects the power cable.