No. 99MBG518A
G-40
PART G : 4 Results
4.2.1 Hardness Chart
Touch the [HD Chart] button on the statistical display screen to display a hardness chart.
⑪
⑨
⑤
⑦
No. Name Details
①
Hardness scale Displays the hardness scale during a test.
②
Vertical axis maximum Displays the maximum value for the vertical axis (hardness) of the
graph.
This can be set automatically or arbitrarily (manually) in the drawing
settings.
③
Vertical axis minimum Displays the minimum value for the vertical axis (hardness) of the
graph.
This can be set automatically or arbitrarily (manually) in the drawing
settings.
④
Horizontal axis minimum Displays the minimum value for the horizontal axis of the graph.
If the group measurement is disabled, the horizontal axis can be
displayed as coordinates in the drawing settings.
This can be set automatically or arbitrarily (manually).
⑤
Horizontal axis maximum Displays the maximum value for the horizontal axis of the graph.
If the group measurement is disabled, the horizontal axis can be
displayed as coordinates in the drawing settings.
This can be set automatically or arbitrarily (manually).
⑥
Line graph Displays a line graph of either the sample number or positional
coordinates, and their corresponding hardness values.
⑦
Upper limit/lower limit Displays the upper limit and lower limit with a dotted line when the
GO/NG judgment is enabled.
y Green: Upper limit
y Yellow: Lower limit
⑧
Cursor Touch the left or right move button to move the red dotted line.
The data for the cursor position is displayed in ⑫ and ⑬ as a nu-
merical value on the vertical and horizontal axes.
⑨
Horizontal axis unit Displays [Point] or [mm] according to the drawing settings.
⑩
Left move button Touch this button to move the cursor left.
⑪
Right move button Touch this button to move the cursor right.
⑫
Horizontal axis position Displays the horizontal axis value of the position where the cursor
is displayed.
To Next Page
Loading...
