Mitutoyo HR-530 Series - Method to Set a Group and Test Multiple Points; Test Method Settings

No. 99MBG518A
C-15
PART C : 3 Method to Set a Group and Test Multiple Points
3
Method to Set a Group and Test
Multiple Points
This chapter explains an example of the case of executing a Rockwell hardness test on mul-
tiple points set as a group. By setting a group, the average value of multiple test results can
be output as one data value. When calculating the average value, it is possible to exclude the
maximumandminimumvalues.Intheactualtest,setthetestforcespeciedinthetechnical
drawing, etc.
Setting item Setting value (example)
Test Method HR
Display [List Ave.] (or [List])
Scale HRA
Number group 5
3.1
Test Method Settings
Set the test method.
For details about setting methods, see
"2.1 Test Method Settings" (page C-6).