No. 99MBG518A
F-9
PART F : 2 Method to Test One Point
2.4
Mounting the Indenter
Mount the indenter set in "2.3 Indenter Settings" to the main unit of the testing machine.
For details about mounting the indenter, see
"3 Inspection and Replacement of Consumable Parts"
(page H-5) in "PART H Inspection and Maintenance".
2.5
Test Force/Time Settings
Set the test force and the test time.
1
Touch the [Force/Time] button on the "basic operation" block.
» The Force/Time settings screen is
displayed.
2
Set the conditions.
For details about various conditions, see
"2.2 Test Force/Time" (page G-18) in
"PART G Settings".
To Next Page
Loading...
