Mitutoyo HR-530 Series - Calculation Settings

No. 99MBG518A
G-28
PART G : 3 Execution Conditions
3.2
Calculation Settings
TheGO/NGjudgmentandgroupsettingscanbespeciedinthecalculationsettings.
3.2.1 GO/NG Judgment
TheGO/NGjudgmentsettingsarespeciedonthe[GO/NG]screen.
①
②
③
No. Name Details
①
Judgment ON/OFF
button
Enables/disables the GO/NG judgment.
Each touch of the button enables (ON) or disables (OFF) the setting.
②
[Upper] button,
[Lower] button
Speciesanddisplaystheupperlimitandlowerlimitofacceptable
values.
The input range has the following relationship between the upper
and lower limit.
Input range: -1000 < Lower limit < Upper limit < 10000
If a value outside of the input range is entered, the [Input error] mes-
sage is displayed.
③
[SPC] button Forwards the upper limit value and lower limit value to the DP-1VA
LOGGER printer. (Touch the [SPC] button to enable forwarding.)
This is not used to output the test data.
Tips
For details about the forwarding methods, see the user's manual for the
DP-1VA LOGGER printer.
Tips
• The [SPC] button in [Calc. setting] and the [OFF] button, [Manual] button, and [Automatic] button for the SPC
in [Exter. output] are not inter-connected.
• Even if the SPC in [Exter. output] is set to [OFF], the [SPC] button in [Calc. setting] can forward the upper
limit to the DP-1VA LOGGER printer.
• Even if the [SPC] button in [Calc. setting] is pressed, the SPC in [Exter. output] is not automatically set to
[Manual] or [Automatic].