Mitutoyo HR-530 Series - Method to Test One Point

No. 99MBG518A
F-1
PART F : 1 Test Flow
1
Test Flow
1.1
Method to Test One Point
Thissectionexplainstheoperationowtotestonepoint.
Preparation
Test method settings
"2.1 Test Method Settings" (page
F-6)
Display conditions settings
"2.2 Display Conditions Settings"
(page F-7)
Indenter settings
"2.3 Indenter Settings" (page F-8)
Indenter mounting
"2.4 Mounting the Indenter" (page
F-9)
Test force/time settings
"2.5 Test Force/Time Settings"
(page F-9)
■When setting a correction value
Correction value settings
"2.6 Correction Value Settings"
(page F-10)
■When setting a GO/NG judgment
GO/NG judgment settings
"2.7 GO/NG Judgment Settings"
(page F-10)