Mitutoyo HR-530 Series - List Display Details

No. 99MBG518A
G-38
PART G : 4 Results
4.2
List Display
Touch the [Result] tab, and then touch the list display button ( ) at the bottom of the screen.
■When the group settings are disabled
⑥ ⑦ ⑧ ⑨ ⑩
②
③
④
⑤
①
No. Name Details
①
List display Displays the test results in a list.
The list displays the test number (1–10240), X (axis [mm]), Y (axis
[mm]), hardness value, and judgment (GO/+NG/-NG).
Touch a line to select the line.
TheX(axis)elddisplaysthetestpositionifthene-adjustment
table for Jominy testing is connected. [- - - - -] is displayed if not
connected.
②
Last page button Touch this button to move to the last page.
③
Next page button Touch this button to move to the next page.
④
Previous page button Touch this button to move to the previous page.
⑤
First page button Touchthisbuttontomovetotherstpage.
⑥
Statistical display button Displays the results obtained by running a statistical calculation.
For details, see "4.1 Statistical Display" (page G-36).
⑦
Delete all button Deletes all of the test results saved to the main unit.
⑧
Delete button Deletes the test result that is selected.
⑨
External output button Outputs data to the external output device set to manual or automat-
ic in the external output settings.
⑩
[Detail] button Switches to the test results display for the test number selected in
the list display.
For details, see "4.1 Statistical Display" (page G-36).