Mitutoyo HR-530 Series - Page 261

No. 99MBG518A
G-37
PART G : 4 Results
NOTICE
• AfteryouhaveconnectedUSBmemoryandopenedale,thenameoflethatwasopenedisdisplayedat
the top of the screen.
While the power for the main unit of the testing machine is on, if the USB memory is disconnected and
reconnectedandthentheleselectioniscanceled,thenameofthelepreviouslydisplayed(opened)is
displayed.
(Alenameisnotdisplayedifthepowerforthemainunitofthetestingmachineisturnedo󰀨rst,andthen
theleselectioniscanceled.)
• The [The memory is full of data.] message is displayed on the display unit if the maximum number of sam-
ples for test data has been reached.
If tests are still run while the calculation data is full, all of the previous test data is erased.
Connect USB memory to automatically save test data to USB memory.
When executing tests that exceed the maximum number of samples, execute the tests with USB memory
connected (available even if the external output is disabled).