Mitutoyo HR-530 Series - Method to Fix the Test Position and Test

No. 99MBG518A
C-3
PART C : 1 Test Flow
1.3
Method to Fix the Test Position and Test
Thissectionexplainstheoperationowtoxthetestpositionandtest.
Preparation
Test method settings
"4.1 Test Method Settings" (page
C-27)
Display conditions settings
"4.2 Display Conditions Settings"
(page C-28)
Scale settings
"4.3 Scale Settings" (page C-29)
Indenter mounting
"4.4 Mounting the Indenter" (page
C-29)
Test time settings
"4.5 Test Time Settings" (page
C-29)
■When setting a correction value
Correction value settings
"4.6 Correction Value Settings"
(page C-29)
■When setting a GO/NG judgment
GO/NG judgment settings
"4.7 GO/NG Judgment Settings"
(page C-29)
Test position registration
"4.8 Test Position Registration"
(page C-30)
Test
Specimen set
"4.9 Setting the Specimen" (page
C-32)
Test execution
"4.10 Executing the Test" (page
C-34)
"5 Executing Continuous Tests"
(page C-37)
Conrmationoftestresults
"4.11ConrmingtheTestResults"
(page C-35)